Linear guides can be divided into three types: roller linear guides, cylindrical linear guides, and ball linear guides. They are used to support and guide movin···

Translation:

1. Stamping Inspection Standards

1.1 Remove burrs that may cause harm, sharp corners, edges, and rough surfaces.

1.2 Unless otherwise specified···

Bending machines are divided into manual bending machines, hydraulic bending machines, and CNC bending machines. Hydraulic bending machines can be further divi···

1. Analysis of Bending Die Structure

1. The most common structure of sheet metal bending dies is shown in Figure 1. In this type of die structure, during bend···

During the bending process of the press brake, due to the maximum stress at both ends of the slider, the reactive force during the bending of the sheet metal c···

1. Main Motor Fails to Start

Reasons

1. Fault in the main motor starting circuit, such as: emergency stop button not released, loose cable connections, 24V co···