The Four Major Components of a Bending Machine
Bending machines, which are widely used machines similar to shearing machines, are primarily utilized for bending thin sheets. In terms of main structure, they generally consist of a frame, workbench, and clamping plate.
1. Common Types of Bending Machines
Bending machines come in common types similar to shearing machines, including manual, hydraulic, and CNC. Manual bending machines further divide into mechanical and electric types. Hydraulic bending machines can be categorized as upward acting and downward acting.
2. Explanation of Bending Machine Components
Slider Section: Typically operated by hydraulic transmission, this section comprises the slider, oil cylinder, and mechanical stop block fine-tuning structure. The numerical values of the mechanical stop block are controlled and adjusted by the CNC system.
Synchronization System: Primarily a mechanical synchronization system known for its simple structure and stable performance. Key components include torsion shafts, swing arms, and hinge bearings.
Workbench Section: Operated through a control panel, the movement distance is controlled by the CNC system. Positioning switches are installed for front and rear limits.
Material Stop Mechanism: Usually driven by a motor, its dimensions are primarily controlled by the CNC system.
What Else to Know About Bending Machines?
In terms of CNC bending machines, our current understanding of this product from the website appears to be insufficiently comprehensive and detailed, indicating the need for further learning.
1. Where is the CNC aspect mainly reflected in CNC bending machines?
The CNC aspect of CNC bending machines mainly lies in the digitized control of the bending machine's ram stroke and pressure.
2. What do V-groove and V10 refer to in CNC bending machines?
V-groove in CNC bending machines refers to the V-shaped groove in the lower die, while V10 indicates a groove width of 10mm.
3. If a CNC bending machine is set at a 90-degree angle but produces a different angle, what could be the reason?
If a CNC bending machine is set at a 90-degree angle but produces a different angle, the cause might be a mechanical issue with the equipment.
